A service upgrade increases the capacity of the power entering the house, usually by replacing the service wires, meter base and main panel with larger ones. It needs a permit, an inspection and coordination with the utility. Call the number on this page to be connected with a local electrician in Chandler.

Planning for solar
Solar installers often need the main panel and service to be a certain size before they can connect. If a solar quote mentions an upgrade, ask a local electrician what that involves so the service work and the solar timeline fit together.
What 100, 150 and 200 amp mean
The rating describes how much current the service can deliver to the house. A 100-amp service suits a small older home without much AC. A 200-amp service is the usual standard now, and some larger houses with pools and shops are better served by more.
Because APS and SRP both serve Chandler, check your bill before scheduling so the electrician coordinates with the correct utility.
Trenching and conduit
If the upgrade requires new underground conduit, the cost depends on the distance, the soil, and whether the route crosses a driveway, patio or landscaping. Caliche and rock can slow digging. The electrician usually walks the path before quoting.
What the utility does
The utility disconnects service at the pole or transformer and reconnects it after the inspection passes. Some utilities need an approval or inspection tag before they will energize new service. The electrician coordinates all of this so you are not left to chase it.
Before electrical work starts in Chandler
Two utilities serve Chandler: APS and SRP. The name on your bill tells you which one to call when the power goes out; APS takes outage reports at 602-371-3680.
Two situations skip the electrician entirely: fire signs (smoke, sparks, a hot or burning odor), which mean leaving and calling 911, and downed lines, which mean staying about 100 feet back and calling 911 and the utility.
Electrical permits for Chandler addresses go through Chandler Development Services. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.
In Arizona, electrical contractors need a license from the Registrar of Contractors (ROC). Residential electrical work falls under the R-11 class, and the ROC's online contractor search shows whether a license is active.
Service upgrades need the utility as well as the city or county: the utility disconnects and reconnects power and decides where the meter goes.
Nearby, the same kind of help is available in Gilbert, Mesa and Tempe.
If something looks wrong at the meter
Scorch marks, a melted meter, buzzing or a loose mast mean stay back and call 911 if there is smoke or fire. Then call the utility, which owns the meter, and a local electrician for the equipment past it. Do not touch the meter base or the mast.
More about Chandler
Calls come in from across Chandler, including around Loop 101 (Price Freeway), Loop 202 (Santan Freeway), Interstate 10.
Chandler has historic districts including Silk Stocking, Southside Village and Historic Downtown; properties generally qualify for historic status at 50 years or older.
Electrical Service Upgrade questions in Chandler
What is an electrical service upgrade?
How long is the power off during a service upgrade?
How long does the permit and inspection take?
Is a service upgrade worth it for an older home?
More electrical services in Chandler
Electrical Service Upgrade nearby
Helpful guides
Sources
Last updated: