An electrical service upgrade increases the capacity of the service itself: the meter base, the service conductors, the main disconnect and usually the panel. It is a bigger job than swapping a panel because the utility is involved. Call the number on this page to be connected with a local electrician in Phoenix.

Service upgrade versus panel upgrade
Service is the whole path power takes into the house: the line from the utility, the meter, the mast or underground feed, and the main disconnect. A panel upgrade can sometimes keep the existing service. A service upgrade changes that path to carry more amps, say from 100 to 200, or to 400 on a large home.
When a Phoenix home needs one
- Original 60 or 100 amp service in an older central Phoenix or Laveen neighborhood
- A pool, spa, second AC unit or detached workshop added to the house
- An EV charger plus rooftop solar on a service that is already near its limit
- A room addition or guest house that adds a lot of circuits
- A damaged mast, meter base or service cable
If you see sparks, smoke or a burning smell at the meter or panel, leave and call 911. If a line is down, stay about 100 feet away, call 911 and then the utility.
How the job goes
The electrician sizes the new service and plans the meter location. APS and SRP both decide where the meter and service entrance go, and both approve changes before the work is built. SRP requires plans for 400 amp or larger services to go to SRP before construction. The utility then disconnects and reconnects power and sets the meter.
The city side is a separate step. City of Phoenix Planning and Development issues the permit, and service upgrades of 200 amps or less can be handled over the counter. Services of 400 amps or more need plan submittal. An inspection is needed before the utility reconnects.
What it costs
National figures put a 100 to 200 amp upgrade at about $750 to $2,000, and a 400 amp service upgrade at about $2,000 to $4,000. A Phoenix guide lists a meter box at about $100 to $650. Trenching, a relocated meter or a long underground run raise the total.
Plan for the heat
Power is off for part of the job. In a Phoenix summer, schedule it for the cooler part of the day and make sure anyone who depends on medical equipment has a plan. Ask your utility about its programs for those customers.
Check the ROC number
Hire a contractor who holds an ROC license in class R-11 or CR-11 and check the ROC number online before you sign.
Electrical Service Upgrade questions from Phoenix homeowners
Is a service upgrade the same as a panel upgrade?
Who decides where the new meter goes?
Do I need a permit?
How long will the power be off?
Related electrical services in Phoenix
Helpful guides
Electrical Service Upgrade in nearby cities and towns
Maricopa County
Pinal County
Sources
- City of Phoenix Planning and Development: electrical permit requirements
- APS Electric Service Requirements Manual, section 300
- SRP Electric Service Specifications, Section 9: Metering
- HomeAdvisor: How Much Does It Cost to Upgrade or Replace an Electrical Panel
- Angi: Phoenix, AZ electrical panel replacement cost
- Arizona Registrar of Contractors: License Classifications
Last updated: