Electrician referrals for Phoenix & nearby townsCall: (602) 584-7286
(602) 584-7286

Hiring an electrician in Arizona: checking an ROC license

electricianphoenixaz.net

In Arizona, the Registrar of Contractors decides who may do electrical work for hire, and the check takes a few minutes. This guide explains the license classes, the small-job exemption and what to ask before anyone opens your panel.

Need an electrician now?
Call now to be connected with a local electrician in Phoenix.
(602) 584-7286

In Arizona, the Registrar of Contractors decides who may do electrical work for hire, and the check takes a few minutes. This guide explains the license classes, the small-job exemption and what to ask before anyone opens your panel.

What the ROC is and why it matters

The Arizona Registrar of Contractors, or ROC, is the state agency for contractors. A contractor who holds an ROC license for residential electrical work uses class R-11, described by the ROC as Electrical, residential. Homeowners can use the ROC's free contractor search on roc.az.gov to check whether a contractor holds an ROC license. Doing so before you hire takes a few minutes, and it screens out people who have no standing to do the work. The ROC also publishes guidance urging homeowners to check the license before they hire.

Electrician Phoenix is a free referral service, not an electrical contractor. It connects callers with independent local electricians, and it cannot vouch for any one of them. The check below is your own safeguard, and it applies to every electrician you consider, whoever referred them.

The license classes in plain language

The ROC publishes classifications for each trade. Three apply to electrical work:

ClassROC descriptionWhat it covers
R-11Electrical, residentialWiring in homes: panels, outlets, lighting, circuits
C-11Electrical, commercialCommercial wiring jobs
CR-11Electrical, dualBoth the R-11 and C-11 scopes

For a house, look for R-11 or CR-11. A C-11 holder works on commercial wiring, and the ROC lists that class separately for a reason. If you own a shop or a rental building, our commercial electrician page explains which jobs fall on that side. For a homeowner, the point is simple: a contractor's class should match your job.

Call now to be connected with a local electrician in Phoenix.
(602) 584-7286

How to check a license, step by step

  1. Ask the electrician for the ROC license number before they come out. A real contractor gives it without fuss, and it should also appear on estimates, contracts and advertising.
  2. Go to roc.az.gov and open the contractor search, which is free.
  3. Enter the number or the business name and confirm the name matches the person or company you are dealing with.
  4. Check that the classification fits the job, such as R-11 or CR-11 for a home.
  5. Read the status shown on the record, and note any complaints or actions the page lists.
  6. If something does not match, call the ROC at 1-877-692-9762, also printed as 1-877-MY-AZROC.

Do this check on the contractor, not on a friend or helper who arrives with them. If a different person shows up than the one you checked, ask who holds the license and verify again.

The $1,000 exemption and where it stops

Some small jobs do not need an ROC license. Per the ROC, work is exempt only when labor and materials total $1,000 or less. There is a catch that trips people up: any project that requires a permit from the local municipality is not exempt, regardless of cost. Most real electrical work, such as adding a circuit, moving a panel or changing a service, needs a permit, so the exemption covers very little of it. A person who says that a job is small enough to skip the license is describing a narrow category, and permit work is outside it.

Our guide to electrical permits in the Phoenix area shows which jobs the offices treat as permit work. Phoenix, for example, exempts only like-for-like swaps of small receptacles and switches, and counts work that adds to or modifies premises wiring as needing a permit.

Questions to ask before you hire

A license check is the floor, not the whole process. Once the number checks out, ask about the job itself:

  • Will you pull the permit, and which office issues it for my address?
  • Who requests the inspection, and will I receive the final approval?
  • What is in the written price, and what could change it?
  • Does the work need coordination with APS or SRP, such as a meter pull?
  • Who handles the cleanup and any patching of drywall or stucco?
  • Do you take after-hours calls if something goes wrong later?

A good contractor answers these directly. Vague answers about permits are a warning sign, because a permitted job is the one an inspector will look at. For more on that, see our page on electrical inspection and code corrections.

Reading a price

Published Phoenix cost guides put electrician labor at about $40 to $100 per hour on HomeGuide and $50 to $150 per hour on Angi, with an average minimum call-out fee of $75 on HomeGuide. These are published ranges, not quotes. Ask for the price in writing and for a breakdown of parts, labor, permit fees and any trip charge. A number far below the range deserves a second look at what is left out, and the full breakdown by job is in our guide to electrician pricing in Phoenix.

Red flags

These patterns come up often enough to name:

  • No ROC number offered, or one that does not match the name on the truck or the contract.
  • Pressure to decide on the spot, or a claim that the offer expires today.
  • A request for a large payment up front, before any materials are bought.
  • Advice to skip the permit to save money or time.
  • A door-to-door pitch after a storm, when roofs, meters and service masts may be damaged and many people are in a hurry.
  • Reluctance to put the scope and price in writing.

Safety before the search

Some problems cannot wait for a comparison. If you see sparks or smoke, smell something burning from an outlet or panel, or find a hot outlet or switch plate, leave the home and call 911 first. For a downed line, stay at least 100 feet away, call 911, then call your utility: APS at 602-258-5483 or 800-253-9408, or SRP, whose downed-line number is 911. After the danger has passed, an emergency electrician can make the repair, and many independent electricians take after-hours calls. The license check still applies, even when you are in a hurry. Never open a panel yourself or let an unqualified helper do it.

Matching the contractor to the job

Different jobs call for different strengths. A person who is good at fixture swaps may not be the right choice for a service change that involves the utility, a heavy EV charger circuit or an older home with aluminum branch wiring. Ask whether the electrician has done your kind of job in your kind of house, and be open about what you know of it. If your house dates from the 1960s or 70s, mention it, since our notes on aluminum wiring in Arizona homes explain why. For panel work, read how a service upgrade involves both the permit office and the utility.

Keep a record of the job

Whatever happens with the work, keep paper. Save the written price, the contract, the permit number and the final inspection approval in one folder, along with the electrician's ROC number and the date you checked it. Photograph the panel before and after, and ask for a panel directory that labels each breaker. If a problem shows up months later, or you sell the house, that folder answers most of the questions a buyer, an insurer or the ROC might ask. It also makes the next electrician's visit shorter, since the previous work is documented instead of guessed at.

Finding electricians near you

Call the number on any page of this site and you will be connected with an independent local electrician who covers your area. You still do the ROC check yourself, since the referral is only an introduction. To see which towns are covered, browse the full list of electrical services or the service area directory.

Frequently asked questions

What does ROC stand for?
The Arizona Registrar of Contractors, the state agency for contractors. Its contractor search on roc.az.gov is free and shows whether a contractor holds an ROC license.
Which license class do I want for a house?
R-11 (Electrical, residential) or CR-11 (Electrical, dual), which covers both the R-11 and C-11 scopes. C-11 alone is the commercial class.
Can someone work without an ROC license on a small job?
Only when labor and materials total $1,000 or less. Any project that requires a permit from the local municipality is not exempt, regardless of cost.
Who do I call if a contractor's license does not check out?
The ROC, at 1-877-692-9762. You can also search the contractor's record on roc.az.gov before signing anything.
Does this site check the license for me?
No. Electrician Phoenix is a referral service that connects you with independent local electricians. Always check the ROC number yourself.
Call now to be connected with a local electrician in Phoenix.
(602) 584-7286

Last updated:

☎ Call (602) 584-7286