Panel repair fixes faults inside the breaker box, such as a failed breaker, a loose or burnt connection, a damaged bus or corrosion. If the panel is hot, smells burnt or sparks, leave the house and call 911 first. Call the number on this page to be connected with a local electrician in Phoenix.

Safety comes first
A hot panel, a burning smell, smoke or sparks means leave the house and call 911. Do not open the panel cover, reset repeatedly or touch anything inside. Panel work is never a do-it-yourself job, because the main lugs stay live even with the main breaker off.
Signs a panel needs repair
- A breaker that will not stay reset, or feels loose or warm
- Buzzing, crackling or humming from the box
- Discolored, melted or scorched breakers and cover
- Rust or water marks, common near outdoor panels and after wet monsoon storms
- Part of the house dead while the breakers look normal
Why panels fail in the Phoenix area
Summer heat works on connections. Metal expands and contracts as the day heats and cools, and lugs can loosen over the years. Panels on sun-baked exterior walls or in hot garages run hotter still, and the long air conditioning season keeps breakers under load. Dust and wind-driven rain during monsoon storms can also reach outdoor panels with a damaged cover or seal.
Repair or replace?
The electrician inspects the panel and tells you whether a repair is enough. A single worn breaker or a loose connection is often a repair. A panel from a problem brand such as Federal Pacific Stab-Lok or Zinsco, or one with a damaged bus, is usually better replaced. See the panel upgrade page if replacement is the answer.
Permits and utility
In Phoenix, swapping a breaker rated 125 amps or less is on the city's exempt list, as long as it is not a service disconnect. Replacing a service disconnect, or any work that changes the wiring, needs a permit from City of Phoenix Planning and Development. If the problem is on the utility side of the meter, the electrician contacts APS or SRP rather than working on their equipment.
What it costs
A Phoenix cost guide lists electrician hourly rates at about $40 to $100, and an average service call fee of about $75. For comparison, a Phoenix guide puts full panel replacement at about $450 to $2,110. Parts, access and how much damage is found change the total.
Hiring
Choose a contractor that holds an ROC license in class R-11 or CR-11, and check the ROC number on the Registrar of Contractors site.
Electrical Panel Repair questions from Phoenix homeowners
Is a warm panel an emergency?
Can I just replace a bad breaker?
Why does my breaker keep tripping?
How do I know whether to repair or replace?
Related electrical services in Phoenix
Helpful guides
Electrical Panel Repair in nearby cities and towns
Maricopa County
Pinal County
Sources
Last updated: