Aluminum branch wiring was used in many homes built from about 1965 to the mid-1970s, and its connections can loosen and overheat over time. The fix is usually special connectors or devices at each connection, not always full replacement. Call the number on this page to be connected with a local electrician in Phoenix.

Why aluminum wiring is a concern
The Consumer Product Safety Commission says aluminum branch wiring was mainly installed from about 1965 to the mid-1970s. Aluminum expands and contracts more than copper, and over years connections can work loose and heat up. CPSC also notes that failing connections seldom give easily detected warning signs, and that repairs should be done by a qualified electrician.
How to tell if you have it
You usually cannot tell from the outlet. Check the age of the house first. Then look at cable jackets in the attic or at the panel for markings that say aluminum or AL. Silver-colored conductors inside a box are another clue. Only an electrician should open a panel or live box, so use this as a reason to book a look, not as a reason to open things yourself.
Warning signs to act on
- Outlets or switches that feel warm, or plates that look discolored
- A faint burning or hot-plastic odor near a device
- Lights that flicker or go dim without a clear cause
- Outlets that work only some of the time
Sparks, smoke or a hot outlet mean leave the building and call 911. The City of Mesa fire department gives the same advice: flames or smoke mean get out and dial 9-1-1.
What repair involves
Common approaches are attaching copper pigtails to the aluminum with connectors made for that purpose, or replacing devices with ones rated for aluminum. In bad cases, circuits are replaced with copper. Phoenix Planning and Development requires a permit for work that modifies premises wiring, so repairs of this kind usually mean a permit and an inspection.
The Phoenix angle
The 1965 to mid-1970s window lines up with a big share of the valley's early suburban growth, so many Phoenix ranch homes from that period are worth checking. Hot attics and heavy summer AC loads put extra stress on connections, and a house that has had several owners may have mixed copper and aluminum repairs from different eras. A remodel or a panel change is a good moment to ask for an assessment.
What it costs
National figures from Homewyse put repair of aluminum wiring at about $395 to $476 per circuit. A house with many circuits adds up, and local pricing, access and permit fees vary. Ask for a written, per-circuit scope. Avoid anyone who suggests that cover-ups or coatings alone solve the problem.
Check the ROC number
Ask the electrician for an ROC license number and confirm it on the Arizona Registrar of Contractors site. Permitted work cannot use the small-job exemption.
Aluminum Wiring Repair questions from Phoenix homeowners
How do I know if my Phoenix home has aluminum wiring?
Is aluminum wiring a fire hazard?
Do I have to rewire the whole house?
What does repair cost per circuit?
Related electrical services in Phoenix
Aluminum Wiring Repair in nearby cities and towns
Maricopa County
Pinal County
Sources
Last updated: