Electrician referrals for Phoenix & nearby townsCall: (602) 584-7286
(602) 584-7286

Aluminum wiring in Arizona homes: what owners should know

electricianphoenixaz.net

Some Phoenix-area homes built in the late 1960s and early 1970s have aluminum branch wiring instead of copper. This guide explains how to tell, why it matters, which repairs are used and how to find a qualified electrician.

Need an electrician now?
Call now to be connected with a local electrician in Phoenix.
(602) 584-7286

Some Phoenix-area homes built in the late 1960s and early 1970s have aluminum branch wiring instead of copper. This guide explains how to tell, why it matters, which repairs are used and how to find a qualified electrician.

Why aluminum wiring shows up in Arizona homes

The Consumer Product Safety Commission (CPSC) says aluminum branch wiring was mainly installed from about 1965 to the mid-1970s. That period overlaps with a large share of the building boom that shaped the Phoenix area. Older neighborhoods across the valley grew quickly during those years, and many ranch homes and early retirement-community houses were wired in that window. If your house falls in that age range, it is worth finding out what is behind the walls instead of assuming.

Not every home from that era has aluminum wiring. Some builders used copper throughout, and past owners may have already had the wiring repaired or replaced. The only reliable way to know is to look at the wire itself or ask an electrician to do so.

Why it can be a problem

Aluminum is a perfectly workable conductor, but it behaves differently from copper at connections. It expands and contracts more as it heats and cools, and the surface oxidizes. Over time, a connection at an outlet, switch or splice can loosen or build up resistance. Resistance creates heat, and heat can scorch a device or the material around it.

CPSC points out that failing connections seldom give easily detected warning signs. That is the central problem. You may have no flickering light or tripped breaker to alert you. Arizona adds a stressor of its own, since attic and exterior-wall temperatures swing through wide daily ranges for much of the year, and every cycle works at the connections.

How to tell if your house has it

  1. Check the age. Homes built from about 1965 to the mid-1970s are the main group.
  2. Look at the cable jacket. Aluminum branch cable is often marked with the word aluminum or the letters AL along the outer sheath. You may see this in an attic, a garage or at the panel where cables enter.
  3. Look at the wire color. Aluminum conductors are silver-colored, while copper is orange-brown. Do not touch bare conductors, and do not remove cover plates or open the panel unless you know how to do it safely.
  4. Ask an electrician. A short electrical inspection can identify the wiring type and note the condition of devices and connections.

A home inspector may flag it during a sale, which is a common way owners learn about it. If a buyer's report mentions aluminum wiring, do not panic, but do not skip the follow-up either.

Warning signs worth acting on

  • Outlets or switch plates that feel warm or look discolored.
  • A faint burning or hot-plastic smell near an outlet or switch.
  • Outlets or switches that stop working intermittently.
  • Light dimming that cannot be explained by the air conditioner cycling.

If you smell burning, see sparks or find a hot outlet, leave the house and call 911 first. Our guide on what to do about a burning smell from an outlet lays out the steps. Do not wait for the problem to repeat.

Repair options

CPSC advises that repairs be done by a qualified electrician. There are several accepted approaches, and the right one depends on the home, the condition of the wiring and the budget.

Replacing with copper

Full replacement removes the aluminum and installs copper branch circuits. It is the most thorough fix, and the most disruptive, because wire must be pulled through walls, attics and sometimes slab-adjacent spaces. In stucco homes with hot attics, access is part of the work. Read about home rewiring and our guide on signs an older home needs rewiring to see when this route makes sense.

Repairing the connections

Many electricians repair connections instead of replacing every run. Methods include approved connectors designed to join aluminum to copper pigtails, and devices rated for aluminum wire. This approach is narrower and less invasive, and our page on aluminum wiring repair covers what is typically involved. Which method fits your house is a decision for the electrician, based on what they find at each connection.

What not to do

Do not swap in ordinary outlets and call it fixed. Standard devices are not a substitute for correct connectors. Do not apply home remedies, and do not try to pigtail the wires yourself. A poor splice can be worse than the original connection.

Call now to be connected with a local electrician in Phoenix.
(602) 584-7286

What it costs

Homewyse puts national figures for aluminum wiring repair at about $395 to $476 per circuit. That is a national number, not a Phoenix quote, and real prices depend on access, the number of connections and the method chosen. A whole-house approach adds up quickly with many circuits, so ask for a clear scope and a written breakdown before work starts. A Phoenix cost guide may show a different range for general electrical labor, which you can compare in our guide to electrician costs in Phoenix.

Independent electricians set their own prices, and this site is a free referral service that does not do the work or set costs. Ask what the visit includes and how the quote is calculated.

Permits, inspections and insurance questions

Repairs that add to or modify wiring may need a permit from your city or county. In Phoenix, that office is the City of Phoenix Planning and Development Department, and other towns have their own building or development services offices. See our guide to electrical permits in the Phoenix area for how this varies. Having the work permitted and inspected leaves a record, which helps when you sell.

Some insurers ask about wiring type. If you are buying or renewing, ask your insurance agent what documentation they want, and keep paperwork from any repair.

Choosing who does the work

Ask for the ROC number and check it for free on roc.az.gov. A contractor who holds an ROC license for residential electrical work uses class R-11, and CR-11 covers both residential and commercial scopes. Work totaling $1,000 or less in labor and materials is exempt from an ROC license, but any project that needs a local permit is not exempt regardless of cost. Our page on hiring an electrician and checking the ROC license explains the lookup.

Ask the electrician whether they have worked on aluminum branch circuits specifically, and which connection method they plan to use. Their answer should be specific.

Panels and aluminum service wires

Do not confuse branch wiring with the larger conductors that feed the meter and panel. The service side is often aluminum by design and is handled differently, and the utility controls the meter and street side. APS and SRP both set requirements for meter and service changes, so a service upgrade involves the utility as well as the electrician. If your home is also older, you may be dealing with a small or crowded panel. Compare notes in our panel upgrade costs guide.

Buying or selling a home with aluminum wiring

Aluminum branch wiring often comes up during a sale. A buyer's inspector may note it, and the buyer may ask for repairs, a credit or a written report from an electrician. If you are selling, getting the wiring examined before listing lets you answer questions with facts instead of guesses, and a repair done with a permit and a final inspection gives the next owner something solid to rely on.

If you are buying, ask the seller for any records of past repairs, and have an electrician look at the panel and a sample of outlets, switches and splices, not only the visible devices. Budget for the repair as part of the purchase decision. Because the home's age is the first clue, a house in the 1965 to mid-1970s range deserves a closer look even if the listing does not mention wiring.

A practical plan

  1. Confirm your home's age and look for the AL marking.
  2. Have an electrician inspect devices and connections.
  3. Choose between repairing the connections and replacing runs, based on what is found.
  4. Get the work permitted where required and keep the paperwork.

Browse all the electrical services available through this site, or see which service areas are covered, from central Phoenix to Pinal County towns.

Frequently asked questions

What years were aluminum branch wires used in homes?
CPSC says aluminum branch wiring was mainly installed from about 1965 to the mid-1970s. Homes outside that window are less likely to have it.
Is aluminum wiring always unsafe?
Not automatically, but the connections are the weak point. CPSC says failing connections seldom give easily detected warning signs, so an inspection is worth having.
Do I have to rewire my whole house?
Not always. Some electricians repair the connections with approved methods instead of replacing every run. Which approach fits depends on what is found.
How much does aluminum wiring repair cost?
Homewyse lists national figures of about $395 to $476 per circuit. Actual Phoenix-area prices vary by access and method, so get a written scope.
Can I fix it myself?
No. CPSC says repairs should be done by a qualified electrician. A poor splice can create a worse hazard than the original connection.
Call now to be connected with a local electrician in Phoenix.
(602) 584-7286

Last updated:

☎ Call (602) 584-7286