A panel upgrade swaps the main breaker panel for a newer one, often with a higher amp rating, so the house can carry today's loads. In Phoenix the usual triggers are a crowded panel, an old problem brand or a new EV charger or pool. Call the number on this page to be connected with a local electrician in Phoenix.

What a panel upgrade involves
The panel is the box that splits incoming power into the circuits in your home. An upgrade replaces it with a new one, and sometimes raises the amp rating, for example from 100 to 200. Only a qualified electrician should open a panel. Never try it yourself.
Signs your Phoenix home may need one
- No open breaker slots, or breakers doubled up to fit more circuits
- Lights dimming when the air conditioner starts
- A fuse box, or a Federal Pacific Stab-Lok or Zinsco panel, which electricians often recommend replacing
- Rust, scorch marks or a buzzing sound at the panel
- Plans for an EV charger, spa, workshop or rooftop solar
If the panel is hot, smells burnt or sparks, leave the house and call 911 first.
Why Phoenix homes hit the limit
Air conditioning is the biggest load in most Phoenix homes, and it runs for much of the year. Many 1940s to 1960s neighborhoods were built with 60 or 100 amp service. Even newer 200 amp subdivisions can run short once a pool, a large AC and an EV charger are all on the same panel. Heat also stresses breakers and connections, especially on sun-facing exterior walls and in garages.
How the job goes
The electrician checks your current load and picks a panel size. In the City of Phoenix, replacing a service panel needs a permit from Planning and Development, and service upgrades up to 200 amps can go through over-the-counter permitting. A larger service of 400 amps or more needs plan submittal. Expect an inspection before the work is signed off.
Utility coordination
If the amp rating changes, the meter and service connection may be involved. APS and SRP each control meter and service locations and seal their meters, so the electrician coordinates with your utility. Power is typically shut off at the street side for part of the job, so plan for a gap without air conditioning in summer.
What it costs
A Phoenix cost guide puts panel replacement at about $450 to $2,110 per job. National figures for a 100 to 200 amp upgrade run about $750 to $2,000. Service size, panel location and any utility work move the price.
Check the ROC number
Arizona contractors who do residential electrical work hold an ROC license in class R-11 or CR-11. Ask for the ROC number and check it on the Registrar of Contractors site before work begins.
Electrical Panel Upgrade questions from Phoenix homeowners
How do I know if I need a bigger panel?
Does a panel upgrade need a permit in Phoenix?
Will I lose power during the upgrade?
Can I swap the panel myself?
Related electrical services in Phoenix
Helpful guides
Electrical Panel Upgrade in nearby cities and towns
Maricopa County
Pinal County
Sources
- City of Phoenix Planning and Development: electrical permit requirements
- APS Electric Service Requirements Manual, section 300
- SRP Electric Service Specifications, Section 9: Metering
- Angi: Phoenix, AZ electrical panel replacement cost
- HomeAdvisor: How Much Does It Cost to Upgrade or Replace an Electrical Panel
- Arizona Registrar of Contractors: License Classifications
Last updated: