The meter base is the box the utility meter plugs into, and the service mast is the pipe that carries the wires up from it to the utility line. The utility owns the meter, and the electrician owns the equipment around it. Call the number on this page to be connected with a local electrician in Phoenix.

Who owns what at the meter
In Phoenix, APS or SRP owns the meter and the lines leading to it. Your electrician owns the meter base, the mast and everything on the house side. That split drives how a repair works. The electrician fixes the customer-owned equipment, and the utility handles the meter and the line connection.
Signs of damage
- A mast that is bent, leaning or pulled away from the roof or wall
- A meter base that is cracked, rusted or hanging loose
- Melted plastic, soot or scorch marks around the meter
- Service wires that sag or are pulled tight from the mast
- Water getting into the meter socket
If it is dangerous
Sparks, smoke or a burning smell at the meter means leave the house and call 911. If a line is down or hanging loose, stay about 100 feet away, call 911 and then the utility. For APS customers the downed line number is 602-258-5483 or 800-253-9408. For SRP customers, report outages at (602) 236-8888. Do not touch the meter, mast or any wire.
Why Phoenix meters take a beating
Monsoon wind, falling branches and flying debris can bend a mast or tear it off the house. Sun and heat age plastic parts and seals over the years, and stucco homes with older meter sockets often show cracks and rust. Pool and patio work near the meter can also damage conduit.
How the repair goes
The electrician inspects the base, mast and connections. APS and SRP both seal their meters, and breaking a seal without authorization is prohibited. So the utility usually has to pull the meter before the electrician works on the base, then reset it afterward. Repairs that change the service need a permit from City of Phoenix Planning and Development, and an inspection before power is restored.
What it costs
A Phoenix cost guide lists a meter box at about $100 to $650 per job. A bent or torn mast, new conduit or a relocated meter can push the total higher. Ask the electrician what the utility will handle and what is billed to you before work begins, so there are no surprises when the job is done.
Hiring
Choose an electrician who holds an ROC license in class R-11 or CR-11, and check the ROC number before work starts.
Meter Base & Service Mast Repair questions from Phoenix homeowners
Who do I call first for a damaged meter?
Can I remove the meter myself?
Does mast repair need a permit?
Will I lose power during the repair?
Related electrical services in Phoenix
Helpful guides
Meter Base & Service Mast Repair in nearby cities and towns
Maricopa County
Pinal County
Sources
- APS Electric Service Requirements Manual, section 300
- SRP Electric Service Specifications, Section 9: Metering
- SRP: Outages and storms
- City of Phoenix Planning and Development: electrical permit requirements
- Angi: Phoenix, AZ electrical panel replacement cost
- Arizona Registrar of Contractors: License Classifications
Last updated: