If the utility has flagged your meter base as unsafe or refused to reinstall the meter, an electrician can correct the issue so power can be restored. Call the number on this page to be connected with a local electrician in Mesa.

Impact and yard damage
A vehicle backing into a wall, a landscaping tool, a fallen branch or a roof repair can all knock a meter base loose. Even if the box looks intact, internal connections may be damaged. An electrician checks the wiring before the utility restores the meter.
Older homes and old equipment
Meter bases on 1950s and 1960s homes may be undersized for today's loads and were not made with modern materials. Rust and past patch jobs are common. An electrician may recommend replacing the base along with the service rather than patching it again.
The median home in Mesa was built around 1988, and meter bases from the 1980s have had many years of sun and heat, so cracked covers and tired jaws are not unusual.
Two utilities serve parts of Mesa; your bill shows which one owns your meter, and the repair steps depend on that utility.
Why a quick patch is risky
Tape, sealant or a mismatched cover can hide a bad connection without fixing it. If the jaws are burned, a patch only delays the failure. A proper repair addresses the cause, which can save a more expensive repair after the next heat wave.
Who to call for what in Mesa
Electric service here is split between SRP and Mesa Electric, so check your bill before reporting an outage. SRP's outage line is (602) 236-8888.
Treat any fallen power line as live. APS and SRP both tell people to stay about 100 feet away and call 911. Inside the house, smoke or a hot burning odor from electrical equipment is also a 911 call, made from outside.
Electrical permits and inspections here, so ask whether your job needs one and who will pull it.
The Arizona Registrar of Contractors issues electrical licenses and lets anyone check a contractor's status online. A one-minute lookup before signing is worth it.
Service upgrades need the utility as well as the city or county: the utility disconnects and reconnects power and decides where the meter goes.
Calls from Mesa are often matched with electricians who also cover Gilbert, Tempe and Chandler.
How a meter base repair usually runs
- The electrician examines the base, mast and wiring.
- The permit and the utility visit are arranged.
- The utility removes the meter and cuts power.
- The base is repaired or replaced and rewired.
- Inspection, then the utility reinstalls the meter.
Treat a damaged meter as live
The wires feeding the meter base are energized by the utility and cannot be shut off at your panel. Do not open the cover, pull the meter or poke at a loose box. Even a cracked base can expose live parts. Keep children and pets away from it.
Around Mesa
Calls come in from across Mesa, including around Downtown Mesa / Main Street, US 60 (Superstition Freeway), Loop 202.
City of Mesa Electric serves about 5.5 square miles centered around downtown Mesa; the city's electric service area is separate from the rest of the city.
Meter Base & Service Mast Repair questions in Mesa
What is a meter base?
Is a damaged meter base dangerous?
How long will the power be off?
Do I need a bigger meter base for solar or a charger?
More electrical services in Mesa
Meter Base & Service Mast Repair nearby
Helpful guides
Sources
Last updated: