A meter base can fail from heat, moisture, loose connections or impact damage. An electrician determines whether a repair or a full replacement is needed, and sets up the utility steps. Call the number on this page to be connected with a local electrician in Gilbert.

Water, dust and creatures
A cracked cover or missing gasket can let water, dust and insects into the base. Wasps, ants and scorpions sometimes nest in the box. Moisture corrodes the jaws that hold the meter, so a damp or stained base deserves a professional look.
Why meter bases wear out here
Meters sit in full sun on stucco walls, and many have baked through decades of summers. Heat dries and cracks plastic covers, loosens connections and ages the insulation of the wires behind them. Age and sunlight are behind many repairs in this area.
Houses built around 2003 commonly have underground service, so the repair often centers on the conduit entry and the base mounting.
Service in Gilbert is split between SRP and APS, and each has its own process for pulling and reinstalling a meter.
Questions to put in the quote
Ask whether the quote covers the permit, the stucco patch, the weatherproof sealing and the utility coordination. Ask what happens if the wiring behind the base is found damaged. Written answers make it easy to compare one electrician against another.
Who touches what
Only the utility handles the meter itself and the lines up to it. The electrician works on the base and everything after. Neither will cross that line, so a repair needs coordination. Expect the electrician to call the utility or submit a request.
Protecting the equipment
Keep shrubs, ladders, bikes and stored items away from the meter and panel. Check the seal, the cover and the gasket after storms. A protected, well-sealed base lasts longer and keeps dust and moisture out of the box.
Useful local contacts for Gilbert
Two utilities serve Gilbert: SRP and APS. The name on your bill tells you which one to call when the power goes out; SRP takes outage reports at (602) 236-8888.
Safety comes first: a burning smell, smoke or sparks from wiring means leave the house and call 911. A downed line is the utility's job, never an electrician's; keep 100 feet back, call 911 and then report it to the utility.
Electrical permits for Gilbert addresses go through Gilbert Development Services. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.
The Arizona Registrar of Contractors issues electrical licenses and lets anyone check a contractor's status online. A one-minute lookup before signing is worth it.
Solar, battery and some generator setups need the utility's approval before they are connected. Electricians who do this work handle the application.
Electricians who take calls here often also work in Chandler, Mesa and Tempe.
Gilbert at a glance
Calls come in from across Gilbert, including around Heritage District, Loop 202 (Santan Freeway), US 60 (Superstition Freeway).
The Heritage District is Gilbert's downtown and original town site, about 0.3 square miles, with a mix of retail, office, education and housing.
Meter Base & Service Mast Repair questions in Gilbert
What does a burned meter base mean?
Can storms damage a meter base?
What if the mast is leaning or pulled away?
Who do I call to have the meter pulled?
More electrical services in Gilbert
Meter Base & Service Mast Repair nearby
Helpful guides
Sources
Last updated: