Appliances such as ovens, dryers, mini-splits, hot tubs, EV chargers and well pumps are commonly given their own circuits. New circuits usually need a permit and inspection. Call the number on this page to be connected with a local electrician in Gilbert.

When a shared circuit stops being enough
A circuit built for a few lights and outlets can carry only so much. Add a space heater, a deep freezer or a power tool, and the wire runs hotter than designed. Tripping is the breaker doing its job; the real answer is capacity, not a bigger breaker.
Why Phoenix-area homes need more circuits
Central air conditioning dominates the load for most of the year, and many homes add mini-splits for casitas, garages and converted spaces. Each of these draws steady, heavy current and expects a circuit that serves it alone.
Newer 2000s homes like those in Gilbert often need dedicated circuits for outdoor kitchens, casitas and EV charging rather than for basic appliances.
Whether the bill reads SRP or APS, new circuits are installed past the meter by an electrician and are inspected by the local building department.
Special equipment adds extras
A hot tub may need a disconnect and GFCI protection, a mini-split a service disconnect, an EV charger a particular outlet or hardwired unit. These parts add to the quote and are worth asking about up front.
Before they leave
Have the electrician run the appliance, confirm the breaker holds, and label the circuit at the panel. Ask for the permit number and keep the paperwork. If an inspection is scheduled, find out who will be present.
Safe habits while waiting
- Do not daisy-chain power strips on big appliances.
- Do not use extension cords for permanent loads.
- Keep the panel clear of storage.
- Never open the panel yourself.
These habits keep the existing wiring safe until the new circuit is in.
Useful local contacts for Gilbert
Electric service here is split between SRP and APS, so check your bill before reporting an outage. SRP's outage line is (602) 236-8888.
Call 911 first for smoke, flames or a burning smell from wiring, and do it from outside. Report a line on the ground to 911 and the utility, and keep roughly 100 feet away from it.
Permitted electrical work in Gilbert is inspected by Gilbert Development Services. The contractor normally applies and schedules the inspection.
In Arizona, electrical contractors need a license from the Registrar of Contractors (ROC). Residential electrical work falls under the R-11 class, and the ROC's online contractor search shows whether a license is active.
Electricians who take calls here often also work in Chandler, Mesa and Tempe.
More about Gilbert
Calls come in from across Gilbert, including around Heritage District, Loop 202 (Santan Freeway), US 60 (Superstition Freeway).
The Heritage District is Gilbert's downtown and original town site, about 0.3 square miles, with a mix of retail, office, education and housing.
Dedicated Circuits & AC Wiring questions in Gilbert
Does a dedicated circuit need a permit?
How long does it take to add a circuit?
Do I need a dedicated circuit for a window or mini-split AC?
Is a dedicated 240-volt circuit different from a 120-volt one?
More electrical services in Gilbert
Dedicated Circuits & AC Wiring nearby
Helpful guides
Sources
Last updated: