A dedicated circuit is a breaker, wire and outlet that serve only one appliance or piece of equipment, so nothing else shares its load. It is typical for large appliances and anything that draws heavy current for long periods. Call the number on this page to be connected with a local electrician in Chandler.

Signs an appliance needs its own circuit
A breaker that trips each time the same machine starts, lights that dim when the compressor kicks on, plugs and cords that feel warm, or a power strip daisy-chained to a heavy appliance all suggest overload. Heavy equipment sharing a general-purpose circuit with lamps and chargers is the usual culprit.
Garages that became rooms
Garages in the Valley are often turned into offices, gyms and workshops that need cooling. A window or mini-split AC, tools and extra refrigeration can all land on one old circuit. New dedicated runs are the usual solution.
Whether the bill reads APS or SRP, new circuits are installed past the meter by an electrician and are inspected by the local building department.
Getting comparable quotes
- Name the equipment and its model if known.
- Say where the panel and the equipment are.
- Ask whether the permit is included.
- Ask what happens if the panel needs work.
With the same answers, quotes from different electricians are easy to compare.
Load calculation comes first
Before anything is installed, the electrician checks that the panel and service can handle the new load along with everything else in the house. If they cannot, you will hear about it up front, with the options laid out.
Who to call for what in Chandler
Two utilities serve Chandler: APS and SRP. The name on your bill tells you which one to call when the power goes out; APS takes outage reports at 602-371-3680.
If you see sparks, smoke or flames, or smell something burning from an outlet, switch or panel, get everyone out and call 911 before anything else. For a power line on the ground, stay at least 100 feet away, call 911, then call the utility.
If the job involves a new panel, added circuits or an EV charger, expect a permit and inspection through Chandler Development Services.
The Arizona Registrar of Contractors issues electrical licenses and lets anyone check a contractor's status online. A one-minute lookup before signing is worth it.
Calls from Chandler are often matched with electricians who also cover Gilbert, Mesa and Tempe.
Warm cords and plugs are warnings
If a plug, cord or outlet is warm under normal use, power is being lost as heat. Unplug the appliance and stop using that outlet. If you smell burning or see sparks or smoke, leave and call 911 first.
More about Chandler
Calls come in from across Chandler, including around Loop 101 (Price Freeway), Loop 202 (Santan Freeway), Interstate 10.
Chandler has historic districts including Silk Stocking, Southside Village and Historic Downtown; properties generally qualify for historic status at 50 years or older.
Dedicated Circuits & AC Wiring questions in Chandler
Why does my breaker trip when I run the microwave?
What if my panel is full?
Will adding a circuit overload my service?
What does a hot tub circuit require?
More electrical services in Chandler
Dedicated Circuits & AC Wiring nearby
Helpful guides
Sources
Last updated: