Electrical troubleshooting is the process of finding why a circuit, outlet or fixture misbehaves, using testing and a methodical check of connections. It comes before any repair so that the real fault is fixed. Call the number on this page to be connected with a local electrician in Chandler.

Small shocks and tingles
A tingle from a faucet, an appliance case or a fixture means current is going somewhere it should not, often due to a missing ground or reversed wiring. Do not dismiss it. Stay off the item, and have an electrician find the fault. Mention any appliance that behaves oddly on the same circuit.
Monsoon aftereffects
A surge or a wet connection after a storm can leave circuits that work sometimes and fail at other times. Moisture in an outdoor box or damage to a ground connection may not show until days later. Mention recent storms when describing the problem. Photos of the panel label and the affected outlets can save time.
Two utilities serve parts of Chandler, so before an electrician is called, it helps to confirm whether the problem is on the utility side or inside the house.
Questions to ask before the visit
- How is diagnosis priced?
- Is there a trip charge?
- Is the fee credited toward repair?
- What happens if the fault is not found?
Answers up front prevent disagreement later. Expect some questions that seem unrelated, since they narrow the search.
Testing under load
Some faults appear only when equipment runs, so the electrician may ask you to start the air conditioner, pump or oven during the test. It is not cruelty to the appliance, only a way to reproduce the condition. Have the problem equipment ready. Keep the final explanation with your home records.
Utility, permits and safety in Chandler
Two utilities serve Chandler: APS and SRP. The name on your bill tells you which one to call when the power goes out; APS takes outage reports at 602-371-3680.
Safety comes first: a burning smell, smoke or sparks from wiring means leave the house and call 911. A downed line is the utility's job, never an electrician's; keep 100 feet back, call 911 and then report it to the utility.
Electrical permits for Chandler addresses go through Chandler Development Services. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.
Ask for the contractor's ROC number and look it up on the Arizona Registrar of Contractors search before work begins. Residential electrical is the R-11 class; CR-11 covers both residential and commercial.
Nearby, the same kind of help is available in Gilbert, Mesa and Tempe.
Safe things you can do
Unplug devices on the circuit, note what was running and check whether a GFCI or a breaker has tripped. Reset a breaker once if you wish, but not again if it trips. Then stop and let an electrician take over. One careful visit is better than several rushed ones.
Around Chandler
Calls come in from across Chandler, including around Loop 101 (Price Freeway), Loop 202 (Santan Freeway), Interstate 10.
Chandler has historic districts including Silk Stocking, Southside Village and Historic Downtown; properties generally qualify for historic status at 50 years or older.
Electrical Troubleshooting questions in Chandler
Is this service an electrical contractor?
Can I troubleshoot electrical problems myself?
Do intermittent problems matter?
How do I check an electrician in Arizona?
More electrical services in Chandler
Electrical Troubleshooting nearby
Helpful guides
Sources
Last updated: