Upgrading a panel means removing the old one, setting a modern one, and reconnecting every circuit with clean labeling. Expect a permit and inspection, plus the utility's part in reconnecting power. Call the number on this page to be connected with a local electrician in Chandler.

Quick checklist before you call
- Note which breakers trip and when.
- Look for a brand name on the panel door.
- Count the open breaker spaces.
- Write down any planned additions: charger, spa, solar, extra AC.
That list helps the electrician quote the right panel the first time.
Heat takes a toll on the equipment
Many panels sit on sun-facing stucco walls or inside hot garages. Months of high temperature loosen lugs, age insulation and make breakers more prone to nuisance trips. An electrician checking a panel here often finds heat damage that a milder climate would not cause.
Two utilities serve parts of Chandler; your bill shows which one, and the electrician will coordinate the disconnect and reconnect with that utility.
What a written quote should say
Look for the panel amperage, the number of spaces, the scope of meter and service work, permit handling, and any exclusions. A clear written scope makes it easier to compare bids. The panel upgrade cost guide explains the typical line items.
How an upgrade usually goes
- The electrician reviews the loads and the service.
- The permit is requested.
- Power is shut off at the utility connection.
- The old panel comes out and the new one is set and wired.
- An inspector reviews the work and the utility restores power.
Utility, permits and safety in Chandler
Two utilities serve Chandler: APS and SRP. The name on your bill tells you which one to call when the power goes out; APS takes outage reports at 602-371-3680.
Treat any fallen power line as live. APS and SRP both tell people to stay about 100 feet away and call 911. Inside the house, smoke or a hot burning odor from electrical equipment is also a 911 call, made from outside.
Electrical permits and inspections here, so ask whether your job needs one and who will pull it.
The Arizona Registrar of Contractors issues electrical licenses and lets anyone check a contractor's status online. A one-minute lookup before signing is worth it.
Work on the meter or service entrance also involves the utility, which controls the meter and must approve service changes. Your electrician coordinates that step.
Nearby, the same kind of help is available in Gilbert, Mesa and Tempe.
After a power event
After a big outage, a nearby lightning strike or a surge, a panel can have damage you cannot see. If breakers behave strangely or appliances fail afterward, have an electrician inspect the equipment. If lines are down outside, stay about 100 feet away and call 911.
Around Chandler
Calls come in from across Chandler, including around Loop 101 (Price Freeway), Loop 202 (Santan Freeway), Interstate 10.
Chandler has historic districts including Silk Stocking, Southside Village and Historic Downtown; properties generally qualify for historic status at 50 years or older.
Electrical Panel Upgrade questions in Chandler
How do I know if my panel needs to be replaced?
Can I upgrade the panel myself?
Does the house need to be vacant during the work?
Who do I call to schedule the power shutoff?
More electrical services in Chandler
Electrical Panel Upgrade nearby
Helpful guides
Sources
Last updated: