Most lighting jobs fall into three groups: swapping an existing fixture, adding a new fixture on an existing circuit, or running new wiring for a new location. The scope decides how long the work takes and what it involves. Call the number on this page to be connected with a local electrician in Chandler.

Is it the bulb, the fixture or the wiring?
Try a known-good bulb first. If the light still flickers, dies or hums, the socket, the dimmer or a loose connection in the box is the likelier culprit, and a new fixture alone will not fix it. An electrician checks the circuit before hanging anything new.
High ceilings, vaulted rooms and stairwells
Great rooms, entries and stairwells hang chandeliers and pendants far from the floor. These jobs call for rated ladders or lifts, a box built for the load and a switch placed where it can be reached, so they usually go to a professional. Good choices up front save repeat visits.
Whether the bill comes from APS or SRP, fixture installation happens past the meter and does not involve the utility.
Supplying your own fixtures
Many electricians will install a fixture you bought, but some prefer to supply parts so responsibility for the whole job is clear. Ask before ordering, and check that the fixture is rated for the location, such as damp areas in a bath. Describing the job precisely produces better quotes.
How a fixture installation goes
- The electrician turns off the circuit and confirms it is dead.
- The old fixture comes down and the box is checked.
- A brace is added if the box cannot carry the weight.
- The new fixture is wired, mounted and tested with the switch.
Take a moment to confirm the plan on site.
Useful local contacts for Chandler
Electric service here is split between APS and SRP, so check your bill before reporting an outage. APS's outage line is 602-371-3680.
Call 911 first for smoke, flames or a burning smell from wiring, and do it from outside. Report a line on the ground to 911 and the utility, and keep roughly 100 feet away from it.
Electrical permits and inspections here, so ask whether your job needs one and who will pull it.
Arizona's handyman exemption does not cover jobs that need a permit, so panel work, new circuits and similar jobs belong with a contractor who holds an ROC electrical license (R-11 or CR-11).
Nearby, the same kind of help is available in Gilbert, Mesa and Tempe.
Is it urgent?
A light that just will not turn on can wait for a scheduled visit. A fixture that sparks, smells or feels hot cannot: switch off the breaker if it is safe to do so, step away, and call 911 for smoke or fire. A cautious approach is always the right one.
More about Chandler
Calls come in from across Chandler, including around Loop 101 (Price Freeway), Loop 202 (Santan Freeway), Interstate 10.
Chandler has historic districts including Silk Stocking, Southside Village and Historic Downtown; properties generally qualify for historic status at 50 years or older.
Lighting Installation questions in Chandler
How much does it cost to install a light fixture?
Why do bulbs burn out so fast in one fixture?
Can recessed lights be added to an existing ceiling?
What does an electrician check before hanging a new fixture?
More electrical services in Chandler
Lighting Installation nearby
Helpful guides
Sources
Last updated: