Damage such as burn marks, cracks, melted jaws, rust or a loose box needs prompt attention. Never touch a damaged meter base. If you see sparks or smoke, call 911 first. Call the number on this page to be connected with a local electrician in Tempe.

Do not wait on a smell
If you smell burning near the meter or see smoke or sparks, move away from the house and call 911 first. Once the situation is safe, call the utility, which owns the meter, and then a local electrician to repair the base and the wiring past it.
Solar and net metering equipment
Homes with rooftop solar often have disconnects and special meters near the base. These add connections and mounting points that can be damaged by weather or poor work. The electrician checks that everything is secure and sized properly while repairing the base.
Houses from the 1980s, typical here, often still have the original meter base, which is worth a close look if the cover is brittle or discolored.
Because APS and SRP both serve Tempe, check your bill before scheduling so the electrician works with the correct utility.
Utility, permits and safety in Tempe
Two utilities serve Tempe: APS and SRP. The name on your bill tells you which one to call when the power goes out; APS takes outage reports at 602-371-3680.
Safety comes first: a burning smell, smoke or sparks from wiring means leave the house and call 911. A downed line is the utility's job, never an electrician's; keep 100 feet back, call 911 and then report it to the utility.
If the job involves a new panel, added circuits or an EV charger, expect a permit and inspection through Tempe Building Safety.
In Arizona, electrical contractors need a license from the Registrar of Contractors (ROC). Residential electrical work falls under the R-11 class, and the ROC's online contractor search shows whether a license is active.
Work on the meter or service entrance also involves the utility, which controls the meter and must approve service changes. Your electrician coordinates that step.
Nearby, the same kind of help is available in Mesa, Paradise Valley and Gilbert.
Repair or replace
A cracked cover or loose mounting may be a small fix. Burned jaws, a bent frame or an obsolete base are usually replaced because the parts cannot be safely patched. The electrician explains which applies and why, so you can weigh the options.
Planning for the outage
Power is off while the base is replaced, and sometimes longer if the utility must return to reinstall the meter. Ask the electrician about timing, and make plans for refrigerators, medical devices and cooling during the hot months.
Generator and solar cautions
Never feed a portable generator into the house or the meter base. This backfeeds the utility lines and can kill line workers. A standby unit connects through a transfer switch installed by an electrician, after the proper permit and inspection.
More about Tempe
Calls come in from across Tempe, including around Interstate 10, US 60, Loop 101.
Meter Base & Service Mast Repair questions in Tempe
Can I remove the meter myself?
Does a meter base repair need a permit?
Is a cracked meter cover a real problem?
How do I find out who owns my meter?
More electrical services in Tempe
Meter Base & Service Mast Repair nearby
Helpful guides
Sources
Last updated: