If a breaker or panel is hot, buzzing, scorched or smells of burning, leave the house and call 911 before calling an electrician. Do not open the panel yourself. Call the number on this page to be connected with a local electrician in Tempe.

The breaker that is always warm
A little warmth under heavy use is normal, but a breaker too hot to hold your hand against signals a loose connection or an overloaded circuit. The heat can damage the panel itself. Reduce the load, stay clear of the cover and call an electrician soon.
Double-tapped and crowded panels
When two wires share one breaker lug, or the panel has no free spaces, connections loosen and overheat. Homes that have grown with new loads often end up this way. The electrician may add space, tandem breakers where allowed or a subpanel. Be honest about how many times it has been reset.
The median home in Tempe was built around 1983, so many panels from the 1980s are now old enough for breakers to weaken or lugs to loosen.
Two utilities serve parts of Tempe, but the breaker panel is the homeowner's side of the meter, so the repair is the same either way.
Local details for Tempe
Depending on the street, a Tempe home may be on APS or SRP. APS lists 602-371-3680 for outages.
If you see sparks, smoke or flames, or smell something burning from an outlet, switch or panel, get everyone out and call 911 before anything else. For a power line on the ground, stay at least 100 feet away, call 911, then call the utility.
Electrical permits for Tempe addresses go through Tempe Building Safety. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.
In Arizona, electrical contractors need a license from the Registrar of Contractors (ROC). Residential electrical work falls under the R-11 class, and the ROC's online contractor search shows whether a license is active.
Electricians who take calls here often also work in Mesa, Paradise Valley and Gilbert.
When a new panel makes more sense
If a panel is old, crowded or a problem brand, a string of breaker repairs may cost more than replacing the whole panel. The electrician can compare both options honestly. For general figures, see the linked panel cost guide. Ask whether any other breakers in the panel look worn.
Choosing the right professional
Confirm the ROC number on the Registrar of Contractors site and that the license class covers residential electrical work. This line only refers callers to independent electricians, and the decision to hire one is yours. Do not store flammable items near the panel.
Recalled and problem panel brands
Some older panels, including Federal Pacific Stab-Lok and Zinsco, are known for breakers that may not trip properly under a fault. If yours is one of these, ask an electrician whether replacement is sensible. A breaker that does not trip is not protection. The visit goes faster when the electrician can reach every circuit.
Around Tempe
Calls come in from across Tempe, including around Interstate 10, US 60, Loop 101.
Circuit Breaker Repair questions in Tempe
Why does my breaker keep tripping?
What is the difference between a breaker and a fuse?
Do old panel brands matter?
Who handles problems before the meter?
More electrical services in Tempe
Circuit Breaker Repair nearby
Helpful guides
Sources
Last updated: