This line is a free referral, so you pay only the electrician for the work, and you can ask for the scope and price before work starts. Call the number on this page to be connected with a local electrician in Scottsdale.

Types of breakers you may have
Standard, GFCI and arc-fault breakers each protect against different things, and a tripping GFCI or arc-fault breaker may point to moisture, a damaged cord or a wiring fault. Knowing which type you have helps the electrician choose a direction. Keep the path to the panel clear before the visit.
Loose lugs and connections
The most common hidden cause is a connection that has loosened from years of heating and cooling. Loose lugs arc, burn the bus bar and cause the breaker to fail. Tightening or replacing the affected parts is routine for an electrician but unsafe for anyone else.
The median home in Scottsdale was built around 1990, so many panels from the 1990s are now old enough for breakers to weaken or lugs to loosen.
Two utilities serve parts of Scottsdale, but the breaker panel is the homeowner's side of the meter, so the repair is the same either way.
Matching breakers to the panel
Breakers must be the exact type listed for the panel, and some older brands are hard to find or no longer made. Where the correct breaker is unavailable, replacing the panel may be the practical choice. Ask the electrician how likely that is before the visit.
Utility, permits and safety in Scottsdale
Depending on the street, a Scottsdale home may be on APS or SRP. APS lists 602-371-3680 for outages.
Safety comes first: a burning smell, smoke or sparks from wiring means leave the house and call 911. A downed line is the utility's job, never an electrician's; keep 100 feet back, call 911 and then report it to the utility.
Permitted electrical work in Scottsdale is inspected by Scottsdale's One Stop Shop permit center. The contractor normally applies and schedules the inspection.
Arizona's handyman exemption does not cover jobs that need a permit, so panel work, new circuits and similar jobs belong with a contractor who holds an ROC electrical license (R-11 or CR-11).
Calls from Scottsdale are often matched with electricians who also cover Paradise Valley, Fountain Hills and Mesa.
How a replacement goes
- The electrician identifies the failed breaker
- Power is shut off at the main
- The old breaker is removed and the lug checked
- A matching breaker is installed and tightened
- The circuit is tested under load
Tell the electrician if the panel was ever worked on by a previous owner.
Do not do these things
- Do not replace a breaker with a bigger one
- Do not tape or wedge a breaker on
- Do not open the panel cover
- Do not keep resetting a tripping breaker
Each of these can turn a nuisance into a fire. Check that smoke alarms work before and after panel work.
Around Scottsdale
Calls come in from across Scottsdale, including around Indian School Road, Chaparral Road, Scottsdale Water Campus.
Village Grove 1-6 and Town and Country Scottsdale are 1950s neighborhoods designated as historic districts, with older homes where original wiring may remain.
Circuit Breaker Repair questions in Scottsdale
Can I reset a breaker myself?
Why will my breaker not reset?
What does a main breaker trip mean?
Is a buzzing breaker an emergency?
More electrical services in Scottsdale
Circuit Breaker Repair nearby
Helpful guides
Sources
Last updated: