A meter base can fail from heat, moisture, loose connections or impact damage. An electrician determines whether a repair or a full replacement is needed, and sets up the utility steps. Call the number on this page to be connected with a local electrician in El Mirage.

Water, dust and creatures
A cracked cover or missing gasket can let water, dust and insects into the base. Wasps, ants and scorpions sometimes nest in the box. Moisture corrodes the jaws that hold the meter, so a damp or stained base deserves a professional look.
Wall movement and settling
Stucco cracks, shifting slabs and block-wall movement can pull a meter base loose from its mounting. A box that is no longer flat to the wall can leave gaps or stress the conduit. The electrician re-anchors or replaces it so it sits secure.
Utility and electrician each have a part
The electrician bills for the base, the work on your side and the permit. The utility handles pulling and reinstalling the meter and may have its own requirements. Ask the electrician what to expect so you can plan the sequence and any related costs.
Useful local contacts for El Mirage
Most homes in the Phoenix area get power from APS or SRP, and your bill shows which one serves your address. Both post outage and downed-line numbers on their websites.
Safety comes first: a burning smell, smoke or sparks from wiring means leave the house and call 911. A downed line is the utility's job, never an electrician's; keep 100 feet back, call 911 and then report it to the utility.
Electrical permits for El Mirage addresses go through El Mirage Building Safety. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.
Ask for the contractor's ROC number and look it up on the Arizona Registrar of Contractors search before work begins. Residential electrical is the R-11 class; CR-11 covers both residential and commercial.
Work on the meter or service entrance also involves the utility, which controls the meter and must approve service changes. Your electrician coordinates that step.
Nearby, the same kind of help is available in Sun City, Youngtown and Surprise.
How a meter base repair usually runs
- The electrician examines the base, mast and wiring.
- The permit and the utility visit are arranged.
- The utility removes the meter and cuts power.
- The base is repaired or replaced and rewired.
- Inspection, then the utility reinstalls the meter.
Do not tamper with the meter
Removing a meter, breaking a seal or bypassing it is unsafe and against utility rules. Only the utility removes or reinstalls a meter. If power was disconnected after damage, wait for an electrician and the utility rather than trying to restore it yourself.
Meter Base & Service Mast Repair questions in El Mirage
What is a meter base?
Who repairs the meter base, the utility or an electrician?
How long will the power be off?
Can a meter base problem cause flickering lights?
More electrical services in El Mirage
Meter Base & Service Mast Repair nearby
Helpful guides
Sources
Last updated: