EV charger installation adds a dedicated circuit and a wall-mounted or plug-in charging unit, usually in the garage or on an outside wall. Most Phoenix homes can take one if the panel has spare capacity. Call the number on this page to be connected with a local electrician in Phoenix.

What the installation includes
A Level 2 charger runs on its own breaker and its own wiring back to the panel. The electrician sizes the circuit to the charger, runs cable through the garage or attic, sets the charger or a receptacle for it and tests the circuit. A standard wall outlet is a slow option that is not meant for daily use.
The panel question comes first
Many Phoenix homes already carry a large air conditioner, a pool pump and sometimes a spa. Newer 200 amp subdivisions often have room. Older neighborhoods built with 60 or 100 amp service often do not, and a panel or service upgrade may come before the charger. An electrician adds up the loads before quoting.
- Open breaker slots and the main breaker size
- Distance from the panel to the parking spot
- Whether the charger goes inside the garage or on an exterior wall in direct sun
- Whether solar or a battery is already on the roof
Permit, inspection and the utility
In Phoenix, a residential charger can be permitted over the counter when the existing service is 200 amp single phase or smaller and needs no upgrade. Larger upgrades go to plan review at City of Phoenix Planning and Development. APS says rooftop solar needs an interconnection application, and SRP asks customers to contact it before installing any generation source; neither page states a rule for chargers alone, so ask your electrician to confirm with your utility.
A run from the house to a driveway post or detached garage means trenching. Arizona 811 asks for at least two full working days of notice before digging.
Heat and Phoenix homes
A charger on a west-facing wall or in a closed garage lives in serious heat, and cables run through hot attics. Ask the electrician about the unit's temperature rating and where the cable will run.
What it costs
National figures from HomeAdvisor put most EV charger installs at about $551 to $1,384 per job. A long cable run, a panel upgrade or trenching raises that, and the charger hardware is often priced separately.
Credentials
Residential electrical work in Arizona falls under ROC class R-11 or CR-11. Ask for the ROC number and check it before you sign.
If a charger, plug or cable gets hot or smells burnt, stop using it, leave the area and call 911.
EV Charger Installation questions from Phoenix homeowners
Can I plug my EV into a regular outlet?
Will my Phoenix panel handle a charger?
Does a charger need a permit in Phoenix?
Does the utility have to approve a home charger?
Related electrical services in Phoenix
Helpful guides
EV Charger Installation in nearby cities and towns
Maricopa County
Pinal County
Sources
- City of Phoenix Planning and Development: electrical permit requirements
- HomeAdvisor: How Much Does Electric Car Charging Installation Cost in 2025?
- APS: Understanding Solar
- SRP: Solar Energy System FAQ
- APS: Arizona 811 partnership for Safe Digging Month
- Arizona Registrar of Contractors: License Classifications
Last updated: