Whole-home surge protection is a device installed at or beside the main panel that limits voltage spikes before they reach your wiring and equipment. In Phoenix, monsoon lightning and outage restorations are the main causes. Call the number on this page to be connected with a local electrician in Phoenix.

What a whole-home protector does
A surge is a short spike in voltage. A whole-home protector connects to the panel and diverts extra energy away from the circuits in the house. Plug-in power strips protect a single device. A panel-mounted unit covers every circuit, including the air conditioner, the pool equipment and hardwired appliances that strips cannot reach.
Why it matters in the Phoenix area
APS says fast-moving monsoon storms can cause power outages. Lightning, downed lines and utility switching can all send spikes through the system, and another spike can arrive when power returns. Both APS and SRP advise turning off or unplugging equipment during an outage so a surge does not damage it when power comes back. Phoenix homes also carry expensive, sensitive loads: variable-speed AC systems, pool controllers, solar inverters and EV chargers.
Signs you could use one
- Electronics or appliances that failed after a storm or an outage
- An AC control board that has been replaced more than once
- Solar inverters or an EV charger that you want to protect
- Flickering lights or a buzzing sound at the panel after storms
- A home with a lot of electronics, a home office or medical equipment
Sparks, smoke or a hot panel are not a surge-protection question. Leave the house and call 911.
How the job goes
The electrician checks the panel, picks a protector that fits it and installs it on a dedicated breaker or at the service entrance. The work happens inside the panel, so it is for a qualified person only. In the City of Phoenix, work on service equipment needs a permit from Planning and Development, so ask the electrician how it will be handled. Installation is usually a short job, with power off for part of it.
What it costs
National figures put a whole-home surge protector, installed, at about $200 to $800 per job. The price depends on the unit's rating, panel layout and how hard the panel is to reach.
Limits to know
A protector reduces damage risk but cannot stop a direct lightning strike. Keep point-of-use strips for sensitive equipment, and ask whether the unit has a status light that tells you when it needs replacing.
Check the ROC number
Hire a contractor that holds an ROC license in class R-11 or CR-11, and check the ROC number online first.
Whole-Home Surge Protection questions from Phoenix homeowners
Is a whole-home protector better than power strips?
Does it protect against lightning?
Can I mount one myself?
What should I do during a monsoon outage?
Related electrical services in Phoenix
Helpful guides
Whole-Home Surge Protection in nearby cities and towns
Maricopa County
Pinal County
Sources
Last updated: