Upgrading service is bigger than replacing a breaker box: it can include a new mast or underground conduit, a new meter base and heavier wire. It usually needs a permit and inspection. Call the number on this page to be connected with a local electrician in Glendale.

Service versus panel: which problem is it?
A crowded panel with a healthy large service needs a panel upgrade or a subpanel. A small service with a perfectly good panel needs a larger service. An electrician sorts out which by checking the main breaker rating and the size of the wire serving it.
Overhead or underground service
Some neighborhoods are fed by overhead lines and a mast on the roof, others by underground conduit. The type affects what the upgrade involves, from replacing the mast and weatherhead to pulling new conductors through conduit. The electrician and utility decide what fits the site.
Houses from the 1980s, typical of Glendale, often began with smaller service, so owners adding a pool or charger commonly ask about moving up in size.
Utility, permits and safety in Glendale
Check the electric bill to see which utility serves the property; around the Valley it is most often APS or SRP. Outage reports go to that utility, which posts its numbers online.
Treat any fallen power line as live. APS and SRP both tell people to stay about 100 feet away and call 911. Inside the house, smoke or a hot burning odor from electrical equipment is also a 911 call, made from outside.
Electrical permits for Glendale addresses go through Glendale Building Safety. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.
Ask for the contractor's ROC number and look it up on the Arizona Registrar of Contractors search before work begins. Residential electrical is the R-11 class; CR-11 covers both residential and commercial.
Work on the meter or service entrance also involves the utility, which controls the meter and must approve service changes. Your electrician coordinates that step.
Calls from Glendale are often matched with electricians who also cover Peoria, Sun City and Youngtown.
Why one bid is higher than another
A larger bid might include a new panel, a surge device and trenching, while a lower one covers only the meter base. Ask each electrician to describe what is included and what is not, so you are comparing the same work rather than different jobs.
How the job unfolds
- The electrician checks loads and the existing service.
- The permit is filed and the utility is contacted.
- The new meter base, mast or conduit and wire are installed.
- The panel is replaced or reconnected.
- The inspector signs off and the utility restores power.
Service work is for professionals only
The service conductors from the utility are always live and cannot be turned off at your panel. Anyone touching them risks severe shock or death. Service upgrades belong to a contractor who holds an ROC license and the utility, with a permit in hand.
More about Glendale
Calls come in from across Glendale, including around Loop 101, 51st Avenue, Mohawk Drive.
Catlin Court Historic District in Glendale is a National Register neighborhood subdivided in 1914 whose homes are mostly bungalows from that period, so older wiring is likely in the historic core.
Electrical Service Upgrade questions in Glendale
What is an electrical service upgrade?
What is the difference between a service upgrade and a panel upgrade?
Is overhead or underground service better?
What should I do if my service mast is damaged?
More electrical services in Glendale
Electrical Service Upgrade nearby
Helpful guides
Sources
Last updated: