A generator needs a transfer switch or a listed interlock so it never feeds power back into the utility lines, and the work usually needs a permit and inspection. An independent local electrician sizes the unit to the loads you want covered and wires it in. Call the number on this page to be connected with a local electrician in Chandler.

Portable, standby and what each connects to
A portable generator is a movable unit that powers selected circuits through an inlet and a transfer device. A standby generator sits on a pad outside, runs on natural gas or propane, and starts itself when the power drops. Both need a safe connection to the house wiring, and the electrician handles that part.
Solar does not mean backup power
Grid-tied rooftop solar shuts off during an outage for lineworker safety, so panels alone will not keep the house running. Some systems add a battery for backup; others pair with a generator. If you have solar, tell the electrician so the transfer arrangement does not clash with the inverter.
Because APS and SRP both serve the town, confirm which one covers your address before asking about generator notices or outage plans.
What drives the price
- Generator size and brand
- Transfer switch type
- Number of circuits backed up
- Gas line or propane connection
- Distance from the panel to the pad
- Permits and inspection
Written quotes made after a site look let you compare fairly, because each of these items can swing the total.
What the electrician should show you
- Where the transfer switch is and how it works
- Which circuits are backed up
- How to start and stop the generator safely
- Where the maintenance schedule is recorded
Ask for it in writing and keep it with the house records, so anyone in the family can run the system.
Before electrical work starts in Chandler
Electric service here is split between APS and SRP, so check your bill before reporting an outage. APS's outage line is 602-371-3680.
Two situations skip the electrician entirely: fire signs (smoke, sparks, a hot or burning odor), which mean leaving and calling 911, and downed lines, which mean staying about 100 feet back and calling 911 and the utility.
Permitted electrical work in Chandler is inspected by Chandler Development Services. The contractor normally applies and schedules the inspection.
Ask for the contractor's ROC number and look it up on the Arizona Registrar of Contractors search before work begins. Residential electrical is the R-11 class; CR-11 covers both residential and commercial.
Work on the meter or service entrance also involves the utility, which controls the meter and must approve service changes. Your electrician coordinates that step.
Calls from Chandler are often matched with electricians who also cover Gilbert, Mesa and Tempe.
Extension cords and overloads
If you run a portable without an inlet, use heavy-duty outdoor-rated cords with enough capacity and keep them out of standing water. Do not exceed the generator's rating; an overloaded unit overheats and can damage appliances. A properly sized circuit setup avoids most of the cord problems people run into.
More about Chandler
Calls come in from across Chandler, including around Loop 101 (Price Freeway), Loop 202 (Santan Freeway), Interstate 10.
Chandler has historic districts including Silk Stocking, Southside Village and Historic Downtown; properties generally qualify for historic status at 50 years or older.
Generator Installation questions in Chandler
Will a generator run my whole house?
Does a standby generator need maintenance?
Does the generator need natural gas?
Who handles outages in my area?
More electrical services in Chandler
Generator Installation nearby
Helpful guides
Sources
Last updated: