Adding recessed lights to an existing ceiling is common because the electrician can usually work from the attic and cut small round openings. The number of lights and the circuit they share decide how involved the job is. Call the number on this page to be connected with a local electrician in Tempe.

Time for an LED retrofit
Old incandescent cans burn hot and waste cooling in a house that already fights desert heat. Swapping to LED retrofit modules or new slim fixtures lowers the heat in the ceiling, and an electrician can tell you whether the existing cans are worth keeping. It is a straightforward upgrade for the right ceiling.
Attic heat and recessed cans
A recessed light sits in the hottest part of the house. Summer attics bake the fixture from above while the bulb heats it from below, so electricians choose fixtures rated for insulation contact and for continuous heat, and they keep loose insulation off the housing. Heat is the main enemy of any light sealed into a ceiling.
Houses from the 1980s usually have attic space that is easy to reach, which helps, but the old cable up there is worth inspecting before new lights are connected.
Whether your bill comes from APS or SRP, the lights are installed and wired the same way past the meter.
Useful local contacts for Tempe
Two utilities serve Tempe: APS and SRP. The name on your bill tells you which one to call when the power goes out; APS takes outage reports at 602-371-3680.
If you see sparks, smoke or flames, or smell something burning from an outlet, switch or panel, get everyone out and call 911 before anything else. For a power line on the ground, stay at least 100 feet away, call 911, then call the utility.
Electrical permits and inspections here, so ask whether your job needs one and who will pull it.
In Arizona, electrical contractors need a license from the Registrar of Contractors (ROC). Residential electrical work falls under the R-11 class, and the ROC's online contractor search shows whether a license is active.
Nearby, the same kind of help is available in Mesa, Paradise Valley and Gilbert.
What affects the cost of recessed lighting
The count of lights is only part of it. Access above the ceiling, new cable runs, switch and dimmer work, drywall patching and the fixture type all add up. Slim LED discs with built-in drivers usually cost more per light than basic cans. Ask for the line items so quotes can be compared fairly.
What to ask before work starts
Ask how many lights fit comfortably, whether the fixtures are rated for insulation contact, which trim and color you can choose, and what the plan is for patching. A thoughtful electrician welcomes these questions. This visit is also the time to raise any worries.
Why insulation-rated matters
Fixtures marked for direct insulation contact can sit in blown-in attic fill. Those without that mark need clearance and a cover, and many homes have older cans with neither. An electrician can tell you which ones you have. Small mistakes here can have large consequences.
More about Tempe
Calls come in from across Tempe, including around Interstate 10, US 60, Loop 101.
Recessed Lighting questions in Tempe
Do I need a permit for recessed lighting in Tempe?
Can recessed lights go in a shower?
Can I dim recessed LED lights?
Are recessed lights worth it in an older home?
More electrical services in Tempe
Recessed Lighting nearby
Helpful guides
Sources
Last updated: