Modern slim LED recessed lights fit in ceilings where old deep cans would not, and they run cooler. They still need correct wiring, a compatible dimmer and the right rating for the space. Call the number on this page to be connected with a local electrician in Mesa.

Is your recessed lighting failing?
Existing cans that flicker, trip a breaker, buzz or switch themselves off after a while may be overheating or poorly connected. Lights that shut off to protect themselves are a sign of trapped heat that needs checking, not a bulb problem. Which one fits depends on the ceiling and the attic above it.
Working around ducts and attic obstacles
Valley attics are crowded with ductwork, trusses and blown-in insulation. Layout has to avoid those obstacles, so a light may shift a few inches from the ideal spot. Experienced electricians plan around them from the attic first. A careful electrician looks at this first.
Houses from the 1980s usually have attic space that is easy to reach, which helps, but the old cable up there is worth inspecting before new lights are connected.
Whether your bill comes from SRP or Mesa Electric, the lights are installed and wired the same way past the meter.
Why layout drives the quote
Ten lights in a straight line cost less than ten in a scattered pattern, because wire runs and cutting add up. A good plan balances light quality against the effort of reaching each spot through a crowded attic. Plan the scope first and the numbers follow.
Utility, permits and safety in Mesa
Electric service here is split between SRP and Mesa Electric, so check your bill before reporting an outage. SRP's outage line is (602) 236-8888.
Two situations skip the electrician entirely: fire signs (smoke, sparks, a hot or burning odor), which mean leaving and calling 911, and downed lines, which mean staying about 100 feet back and calling 911 and the utility.
Electrical permits and inspections here, so ask whether your job needs one and who will pull it.
The Arizona Registrar of Contractors issues electrical licenses and lets anyone check a contractor's status online. A one-minute lookup before signing is worth it.
Nearby, the same kind of help is available in Gilbert, Tempe and Chandler.
Planning the layout together
A good visit starts with the room: where people work, where furniture sits and where the switch will be. The electrician marks light positions with tape or pencil so you can see the pattern before any cutting happens. Nothing should be cut until you agree to the layout.
Do not DIY the attic part
Cutting into ceilings is easy to start and hard to finish safely. Hitting wire, pushing insulation into a fixture or making a loose splice are common errors, and attic heat adds its own danger. Pass this one to a professional. Never ignore a warning sign from a fixture.
More about Mesa
Calls come in from across Mesa, including around Downtown Mesa / Main Street, US 60 (Superstition Freeway), Loop 202.
City of Mesa Electric serves about 5.5 square miles centered around downtown Mesa; the city's electric service area is separate from the rest of the city.
Recessed Lighting questions in Mesa
How many recessed lights do I need in a room?
Can I choose the color of the light?
Why do my cans keep switching themselves off?
Are recessed lights worth it in an older home?
More electrical services in Mesa
Recessed Lighting nearby
Helpful guides
Sources
Last updated: