Recessed lighting means lights set into the ceiling, usually fed by cable run through the attic. An electrician plans the spacing, cuts openings, wires the lights to a switch or dimmer and checks the fixtures are rated for the insulation above. Call the number on this page to be connected with a local electrician in Glendale.

Q: Can lights be added without a remodel?
A: Often, yes. With attic access above the room, an electrician can cut openings, pull cable and patch small holes. Rooms with a second floor above or no access need more work, which the electrician explains on the visit. A quick look in the attic tells most of the story.
Dimming in homes with big AC loads
Lighting on a shared circuit can flicker when the air conditioner starts. Electricians check what else is on the circuit and may place the new lights on their own line so dimming stays smooth through hot afternoons. Separate lines keep the lights steady when other loads start.
Houses from the 1980s usually have attic space that is easy to reach, which helps, but the old cable up there is worth inspecting before new lights are connected.
Before electrical work starts in Glendale
Check the electric bill to see which utility serves the property; around the Valley it is most often APS or SRP. Outage reports go to that utility, which posts its numbers online.
Call 911 first for smoke, flames or a burning smell from wiring, and do it from outside. Report a line on the ground to 911 and the utility, and keep roughly 100 feet away from it.
Permitted electrical work in Glendale is inspected by Glendale Building Safety. The contractor normally applies and schedules the inspection.
In Arizona, electrical contractors need a license from the Registrar of Contractors (ROC). Residential electrical work falls under the R-11 class, and the ROC's online contractor search shows whether a license is active.
Calls from Glendale are often matched with electricians who also cover Peoria, Sun City and Youngtown.
Patching and painting
Cutting holes means patching if lights move later, and new openings may need touch-up paint. Ask whether the electrician includes that or leaves it for you, since the answer can change which quote looks lower. Settle these questions early to avoid surprises later.
Choosing trims, sizes and beam angles
Slim discs, baffle trims and gimbal trims each shape light differently. Smaller discs suit low ceilings, while larger ones work in big rooms. Bring a sense of the look you want and the electrician can match it to the space. Ask for the fixture details in writing.
Keeping them working
Replace failed modules with the same type, keep the area above the lights free of stored items and insulation piles, and do not add a higher-output bulb than the label allows. A little care keeps the ceiling safe. A calm, careful approach keeps everyone safe.
More about Glendale
Calls come in from across Glendale, including around Loop 101, 51st Avenue, Mohawk Drive.
Catlin Court Historic District in Glendale is a National Register neighborhood subdivided in 1914 whose homes are mostly bungalows from that period, so older wiring is likely in the historic core.
Recessed Lighting questions in Glendale
How many recessed lights do I need in a room?
Can recessed lights go in a shower?
Will the electrician patch the drywall?
Is it better to use cans or slim discs?
More electrical services in Glendale
Recessed Lighting nearby
Helpful guides
Sources
Last updated: