Portable generators never plug into a wall outlet, and standby units connect through a transfer switch installed at the panel. The electrician also picks the pad location, fuel connection and circuits to back up. Call the number on this page to be connected with a local electrician in Tolleson.

Three ways to tie a generator into a home
- An automatic transfer switch, used with standby units
- A manual transfer switch with a handful of chosen circuits
- A listed interlock kit with a generator inlet, used with many portables
Each keeps generator power from flowing back to the utility, which is the point of all three.
Older panels and generator hookups
Houses with older or crowded panels may need work before a transfer switch fits, since the switch takes space and the breakers must be compatible. Newer subdivisions usually have more room, though a charger, pool and big AC can still strain things. The electrician looks at the panel first.
Useful local contacts for Tolleson
Outages are reported to the utility named on your electric bill (in this part of the Valley that is usually APS or SRP), not to an electrician.
Call 911 first for smoke, flames or a burning smell from wiring, and do it from outside. Report a line on the ground to 911 and the utility, and keep roughly 100 feet away from it.
Electrical permits and inspections here, so ask whether your job needs one and who will pull it.
The Arizona Registrar of Contractors issues electrical licenses and lets anyone check a contractor's status online. A one-minute lookup before signing is worth it.
Solar, battery and some generator setups need the utility's approval before they are connected. Electricians who do this work handle the application.
Calls from Tolleson are often matched with electricians who also cover Avondale, Laveen and Goodyear.
Gas, propane and the hidden line item
Natural gas standby units need a gas line sized for the generator, often from a plumber or gas contractor and sometimes a meter change. Propane needs a tank and regulator. That fuel work is a separate piece of the budget, so ask the electrician what is included.
How a generator job usually goes
- Site visit to check the panel, loads and placement
- Written scope with generator, switch and fuel plan
- Permit filed by the contractor
- Pad, conduit, wiring and switch installed
- Inspection by the permit office, then a test under load
Details vary with the unit and the property.
Extension cords and overloads
If you run a portable without an inlet, use heavy-duty outdoor-rated cords with enough capacity and keep them out of standing water. Do not exceed the generator's rating; an overloaded unit overheats and can damage appliances. A properly sized circuit setup avoids most of the cord problems people run into.
Generator Installation questions in Tolleson
Do I need a permit to install a generator?
Can a generator run my central AC?
How long does a generator installation take?
Who should I call during a power outage?
More electrical services in Tolleson
Generator Installation nearby
Helpful guides
Sources
Last updated: